Listening To Radio; Presetting Stations - Samsung HT-DS690 Instruction Manual

Digital home theater system
Hide thumbs Also See for HT-DS690:
Table of Contents

Advertisement

Listening to Radio

You can listen to the chosen band (FM, AM broadcast stations) by using either
the automatic or manual tuning operation.
Remote Control Unit
1
2
Press TUNER/
Tune in to the
BAND button.
desired station.
Automatic Tuning 1
The selection toggles back
and forth between "FM
AM"
each time the TUNER(BAND)
button is pressed.
Automatic Tuning 2
Manual Tuning
Main Unit
Press the Function
1
2
Select a broadcast
button to select the
desired band (FM,
station.
AM).
Automatic Tuning 1
PRESET and then press
button to select the preset station.
Automatic Tuning 2
then press and hold
automatically search the band.
Manual Tuning
press
higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
69
In a poor reception area, select MONO for a clear, interference-free broadcast.
When
is pressed, a
preset broadcast station is
selected.
Press and hold
to
automatically search for
active broadcasting stations.
Briefly press
to
increase or decrease the
frequency incrementally.
Press the STOP ( )
button to select
Press the STOP ( ) button
to select "MANUAL" and
button to
Press STOP ( ) to select
MANUAL and then briefly
to tune in to a lower or

Presetting Stations

You can store up to:
15 FM stations
15 AM stations
Example: Presetting FM 89.1 in the memory
Press the
1
2
TUNER(BAND)
Press
button and select
select "89.10".
the FM band.
Each time the button is pressed,
Refer to Step 2 on page 69 to
the band switches between
automatically or manually tune in
"FM
AM".
to a station.
Press the TUNER
4
Press
5
to select preset
MEMORY button
number.
again.
You can select between 1 and
Press the TUNER MEMORY button before
'PRGM' disappears from the display.
15.
'PRGM' disappears from the display and
the station is stored in memory.
To tune in to a preset station, press
remote control to select a channel.
• FM
Frequency Modulation
• AM
Medium Wave
3
Press the TUNER
to
MEMORY button.
"PRGM" flashes in the display.
To preset another
6
station, repeat
steps 2 to 5.
on the
70

Advertisement

Table of Contents
loading

Table of Contents