Mercedes-Benz E 300 Operator's Manual page 126

Taillamp Assemblies
Open trunk lid.
1 Turn signal lamp
(21 W/32 cp bulb)
2 Stop, tail and parking lamp
(21/4 W/35/1.2 cp bulb)
3 Tail, parking and side marker lamp
(5 W/4 cp bulb)
Swing cover aside. Twist bulb socket
counterclockwise and pull out. Push
bulb into socket, turn counterclockwise
and remove.
Insert new bulb in socket, push in and
twist clockweise. Reinstall bulb socket,
and close cover
4 Driver's side:
Rear fog lamp
(21 W/32 cp bulb)
5 Backup lamp
(21 W/32 cp bulb)
Twist bulb socket counterclockwise
and pull out. Push bulb into socket,
turn counterclockwise and remove.
Insert new bulb in socket, push in and
twist clockwise. Reinstall bulb socket.
Side Marker Lamp, Front
(5 W/4 cp bulb)
From inside wheel house (arrow)
reach behind side marker lamp and
press tab. Remove lamp from
bumper and take out bulb.
126