Lcd Screen - Icom IC-F8100 Instruction Manual

■ LCD screen

• Memory Channel Display
q w e
o
i
q RECEIVE/TRANSMIT ICON
➥ " RX" appears when signals are received or the
squelch is open.
➥ " TX" appears during transmit.
w S-METER/TX METERS
➥ Shows the receiving signal strength during re-
ceive.
➥ Show the selected transmit output power.
Mic gain can also be displayed when the "METER
TYPE" item in the Admin Menu is set to "MIC
LEVEL."
e OPERATING MODE INDICATOR
Shows the selected operating mode.
• "LSB," "USB," "CW," "AM" or "D1" (Data mode) appears,
depending on the operating mode.
r MUTE ICON
➥ "S" appears when the Call squelch function is se-
lected.
➥ "L" appears when the S-meter squelch is se-
lected.
➥ "V" appears when the Voice squelch is selected.
t GPS ICON
➥ Appears when a valid position data is received
from a GPS receiver that is connected to the AD-
119 Junction box.
➥ Blinks when an invalid data is received from the
GPS receiver.
y TIME INDICATOR
Shows time data.
u FUNCTION DISPLAY
Shows the function of the function keys ([§], [§§] and
[§§§]).
r t y
:
u
• ALE ID Display
q w
!0
o
i
• Selcall Address Display
q w
!0
o
i
e r t y
u
i SUB READOUTS
<Memory Channel display>
Shows the transmit and receive frequencies of the
channel. Receive frequency is displayed at right
side, transmit frequency is displayed at left side.
<Selcall Address display>
Shows the Selcall ID or phone number of the call.
<ALE ID display>
Shows the NET ID for ALE transmission.
o MAIN READOUTS
<Memory Channel display>
Shows the channel name of the channel.
<Selcall Address display>
Shows the Selcall Address of the call.
<ALE ID display>
Shows the ALE ID for ALE transmission.
!0 CALL ICON
Shows Call type icons for Selcall.
• The " " icon appears when the Selective call is se-
lected on the Selcall Address display.
• The " " icon appears when the Phone call is selected
on the Selcall Address display.
• The " " icon appears when the Message call is se-
lected on the Selcall Address display.
• The " " icon appears when the GPS Send Position
call is selected on the Selcall Address display.
• The " " icon appears when the GPS Get Position call
is selected on the Selcall Address display.
• The " " icon appears when the Get Status call is se-
lected on the Selcall Address display.
• The " " icon appears when the Emergency call is se-
lected on the Selcall Address display.
• The " " icon appears when the Channel Test call is
selected on the Selcall Address display.
PANEL DESCRIPTION
e r t y
:
u
1
1
5