Table of Contents
Advertisement
OSD Menu
Auto adjust: Setup the parameter of the screen automatically.
H/V Position: Adjust the transverse/vertical position of the screen.
Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a
stable image is obtained.
Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen.
DNR: If the broadcast signal received is weak, you can select the DNR option to reduce
the video noise level between Off, Low, Mid and High.(Invalid in VGA mode)
Power Saving: Turn on/off the Power Saving mode, when the function is on, the machine is in
energy-saving status.
2. Audio menu
Description
Balance: Adjust the audio output between left and right speakers.
Bass: Adjust the level of the lower-pitched sounds.
Treble: Adjust the level of the higherpitched sounds.
Sound Mode: Select your desired picture mode.
You may select the sound mode directly by pressing the SOUND button on the remote
control.
Sound Surround: Turn on/off on the surround function.
SPDIF: Select the mode of the digital audio output such as PCM and Dolby digital or off.
Auto Volume Control:Turn on the Auto Volume Control function, and the TV will auto control
the volume when you change the programs.
10
OSD Menu
Advertisement
Table of Contents
