Motorola Titanium User Manual page 60

Note:
Range will vary based on terrain, man-made structures
and atmospheric conditions.
Tip: To add a quick switch for Direct Talk, touch and hold a
blank spot on your home screen, then touch
Widgets > Direct Talk
You can make:
– two-way radio calls conducted off the
Code calls
network and using open channels and codes. In
these calls, anyone using your same channel and
code can hear your conversation.
– two-way radio calls conducted off the
Private calls
network and using the wireless phone numbers of
the participants. In these calls, others using the same
channel cannot listen in.
When using Direct Talk mode, the two phones should
be a minimum of six feet apart to maximize
performance and improve transmission range. You can
only make Direct Talk calls to users located within your
range. This varies according to terrain, man-made
structures, and atmospheric conditions.
Most traditional phone features are not available in
Direct Talk mode, including on-network phone calls;
52 3. Making and Answering Calls
Motorola
.
Direct Connect, Group Connect, Talkgroup calls, and
Call Alerts; data services; messaging; call timers; and
call forwarding.
Setting Your Phone to Direct Talk
Before you and another caller can use Direct Talk, both
of your phones must be set to Direct Talk mode.
1.
Touch
>
2.
Touch .
Direct Talk
After a few seconds, your channel and code appear on
the display screen. Your phone displays the last
channel and code used for Direct Talk.
To return to network mode from Direct Talk:
1. Touch
>
2.
Touch Direct Talk .
After a few seconds, your phone returns to network
service.
.
Direct Talk
.
Direct Talk