Toshiba Satellite P200 Series Maintenance Manual page 167

4.17 Fingerprint Module
3. Remove the Fingerprint module by lifting it gently.
Installing the Fingerprint Module
To install the Fingerprint Module, follow the steps below and refer to the figures in the
preceding section:
1. Turn the top cover upside down and place the Fingerprint Module and the Fingerprint
Module Bracket in position on top.
2. Secure the Fingerprint Module bracket with four M2.5x3 screws.
/ P205
Satellite P200 Series Maintenance Manual
Figure 4-51 Removing the fingerprint module
[CONFIDENTIAL]
4 Replacement Procedures
4-45