Change Password; Exit - MATSONIC MS9147C Series User Manual

3: BIOS Setup Utility

Change Password

If you highlight this item and press Enter, a dialog box appears that
you can enter a Supervisor password. You can enter no more than
six letters or numbers. Press Enter after you have typed in the
password. There will be the second dialog box asking you to retype
the password for confirmation. Press Enter after you have retyped
it correctly. Then, the password is required for the access to the
Setup Utility or for it at start-up, depending on the setting of the
Password Check item in Advanced Setup.

Exit

Highlight this item and press Enter to save the changes that you
have made in the Setup Utility configuration and exit the program.
When the Save and Exit dialog box appears, press Y to save and
exit, or press N to exit without saving.
39