Advertisement
machine, you'll always start with the best, most precise ingredients.
This grinder is fully automated – just choose your grind setting and
number of cups, push Start, and the LCD with countdown timer
lets you know how soon you'll have your perfectly ground coffee!
OPEraTiNg iNsTruCTiONs
1. Remove bean hopper lid.
2. Fill bean hopper, making sure that the lid closes securely.
Maximum capacity is 240g, be sure you have enough beans to
grind your desired amount of coffee.
3. Plug cord into outlet.
4. Select grind setting – turn the hopper to your desired grind
setting. The higher the number the coarser the grind. Use 1-6
for Espresso, 7-12 for Auto Drip, 13-18 for French Press. Your
current selection will be displayed on the LCD.
5. Select cup setting – press the # of Cups Button repeatedly until
your desired number of cups is displayed on the LCD, from 1
to 14 cups. Press and hold the button to scroll through the
numbers quickly.
6. Press the Start/Stop button to begin grinding.
A safety interlock system prevents the unit from operating unless
the hopper and grind chamber are properly in place.
Note: If the grind chamber is overfilled the chute can get clogged
and the unit will not work. The LCD will flash. To unclog, use
the scoop brush to clear out the chute of excess grounds.
also note: If the grinder stops and displays HHH in the LCD
screen at any point, the motor has likely over-heated. Wait
approximately 2 minutes for your grinder to cool off; when the
HHH is no longer displayed, resume use.
7. Grinding will automatically stop upon completion.
Note: to pause or cancel operation during use, see below.
8. Pull the grind chamber toward you to remove from unit.
TO PausE Or CaNCEl griNDiNg
a. To pause the grinding, press the Start/Stop button. The
grinder will stop and the countdown timer will flash. Press the
Start/Stop button again to resume.
b. To cancel the grinding, press and hold the Start/Stop
button for 2-3 seconds.
NOTE: The unit will pause for up to 5 minutes before cancelling
the grind.
MANUAL GRIND
If you prefer, after selecting your grind setting, you have the
option of manually controlling how much coffee the unit will
grind. To do so, follow steps 1-4 on previous page. Then press
and hold the manual button until the desired amount of coffee
has been ground. The LCD will display M.
Advertisement
