Error! Use the Home tab to apply
Home tab to apply
4.8
Function Board
Removing the Function Board
Remove the function board according to the following procedures and Figure 4.14.
1. Remove one M2x3 screw from the function board.
2. Separate the function board from the logic upper assembly.
Installing the function board
Install the function board according to the following procedures.
1. Seat the function board in the correct place on the logic upper assembly.
2. Secure the function board with one M2x3 screw.
Satellite L550 Maintenance Manual
2 to the text that you want to appear here. Error! Use the
2 to the text that you want to appear here.
M2x3*1
Figure 4.14 Removing the function board
4 Replacement Procedures
4-25