Advertisement
Confi guring Home City Settings
There are two Home City settings: actually selecting the Home City and selecting either standard time or
daylight saving time (DST).
To confi gure Home City settings
Note
This watch does not have a city code that corresponds to Newfoundland.
1.
In the Timekeeping Mode, keep
x Second Hand goes through the following sequence.
Moves to
YES (or Y for some models) or NO (N) to indicate the last signal
reception result, then to READY (R), and then to the city code of the currently
selected Home City.
This is the city code setting mode.
The watch will exit the setting mode automatically if you do not perform any
operation for about two or three minutes.
For details about city codes, see the "City Code Table".
2.
To change the Home City setting, press
clockwise.
Keep pressing
want to select as your Home City.
Each time you change the city code setting, the
Hand and n Day move to the current time and date for that city code. Do not
perform the next operation until these hands stop moving.
B to toggle the time for the currently selected city code between STD (standard time)/DST (daylight
3.
Press
saving time).
While you are selecting the Home City code, the
selected city code is confi gured for standard time (STD) or daylight saving/summer time (DST).
Note that you cannot switch between
STD (standard time)/DST (daylight saving time) while UTC is
selected as your Home City.
4.
After all the settings are the way you want, press
To toggle the Home City time between standard time and daylight saving time
1.
Perform the step 1 under "To confi gure Home City settings".
z Hour Hand and c Minute Hand move to the current time for that
Each time you select a city code, the
city code. Do not perform the next operation until these hands stop moving.
While you are selecting the Home City code, the
selected city code is confi gured for standard time (STD) or daylight saving/summer time (DST).
B to toggle the time for the city code of the currently selected Home City between STD (standard
2.
Press
time)/DST (daylight saving time).
Note that you cannot switch between
STD (standard time)/DST (daylight saving time) while UTC is
selected as your Home City.
3.
After the setting is the way you want, press
Note
After you specify a city code, the watch will use UTC* offsets to calculate the World Time based on the
current time in your Home City.
*
Coordinated Universal Time, the world-wide scientifi c standard of timekeeping. The reference point for
UTC is Greenwich, England.
Selecting some city codes automatically makes it possible for the watch to receive the time calibration
signal for the corresponding area. See "Radio Controlled Atomic Timekeeping" for details.
Confi guring Current Time and Date Settings Manually
You can confi gure current time and date settings manually when the watch is unable to receive a time
calibration signal.
To change the current time setting manually
1.
In the Timekeeping Mode, keep
x Second Hand goes through the following sequence.
Moves to
YES (or Y for some models) or NO (N) to indicate the last signal
reception result, then to READY (R), and then to the city code of the currently
selected Home City.
v Left Dial Hand will indicate whether the currently selected city code is
The
confi gured for standard time (STD) or daylight saving/summer time (DST).
2.
Change the Home City and daylight saving time (DST) settings, if you want.
For details about these settings, see steps 2 and 3 under "To confi gure Home
City settings".
In the following steps, each press of
below.
Home city/DST
C.
3.
Press
v Left Dial Hand will move to 12 o'clock. This is the time setting mode.
The
x Second Hand indicates whether the current time is a.m. (A) or p.m. (P).
The
D (+) and B (–) to change the time (hour and minute) setting.
4.
Use
Each press of either button will move the hands (
Hand) one minute.
Holding down
Hand movement in the applicable direction. To stop high-speed hand
movement, press any button.
When setting the time, make sure that the
indicating A (a.m.) or P (p.m.) for the time you are setting.
If you want to change the date setting at this time, press
procedure starting from step 3 under "To change the current date setting
manually".
5.
After the time setting is the way you want, press
timekeeping.
This will cause the
resume movement from there.
Operation Guide 5083 (OC)
A depressed (for about fi ve seconds) as the
D to move the x Second Hand
D until the x Second Hand is pointing at the city code you
z Hour Hand, c Minute
v Left Dial Hand will indicate whether the currently
A to return to the Timekeeping Mode.
v Left Dial Hand will indicate whether the currently
A to return to the Timekeeping Mode.
A depressed (for about fi ve seconds) as the
C cycles between settings as shown
Hour/Minute
Day
z Hour Hand and c Minute
D or B will start high-speed z Hour Hand and c Minute
x Second Hand is correctly
C and perform the
A to return to regular
x Second Hand to move automatically to 12 o'clock and
To change the current date setting manually
00
10
90
80
70
50
60
Setting the year (tens digit)
0
1
9
8
7
5
6
Setting the year (ones digit)
Dec
Nov
Jan
Oct
Sep
Aug
Jul
May
Jun
Setting the month
Using the Stopwatch
The stopwatch measures elapsed time and split times.
Year
(tens digit)
Year
(ones digit)
Month
To perform an elapsed time operation
B
B
Start
Stop
To pause at a split time
B
D
Normal stopwatch hand movement will
resume automatically after fi ve seconds.
Start
Split
1.
In the Timekeeping Mode, keep
as the x Second Hand goes through the following sequence.
Moves to
YES (or Y for some models) or NO (N) to indicate the last
signal reception result, then to READY (R), and then to the city code
of the currently selected Home City.
20
C twice.
2.
Press
x Second Hand will move to the tens digit of the current year
The
30
setting. This is the year setting mode.
The year can be set in the range of 2000 to 2099.
40
D to move the x Second Hand clockwise until it is pointing at
3.
Press
the year tens digit you want to select.
4.
After you select the year tens digit, press
x Second Hand will move to the ones digit of the current year.
The
D to move the x Second Hand clockwise until it is pointing at
2
5.
Press
the year ones digit you want to select.
6.
After you select the year ones digit, press
3
x Second Hand will move to the currently selected month. This
The
is the month setting mode.
4
D to move the x Second Hand to the month setting you want.
7.
Use
8. After the month setting is the way you want, press C.
The x Second Hand will move to 12 o'clock, and the watch will enter
Feb
the day setting mode.
Mar
Apr
D (+) and B (–) to change the n Day setting.
9.
Use
If you want to change the time setting at this time, press
the procedure starting from step 3 under "To change the current time setting
manually".
10.
After the settings are the way you want, press
timekeeping.
x Second Hand to move automatically to 12 o'clock and
This will cause the
resume movement from there.
v Left Dial Hand changes automatically
The day of the week indicated by the
in accordance with the date (year, month, and day).
Note
The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch's rechargeable battery replaced or
after power drops to Level 3.
Hand Functions
x x Second Hand: Indicates the stopwatch 1/10-second count.
v v Left Dial Hand: Indicates the stopwatch 1/100-second count.
b b Right Dial Hands: Indicate the stopwatch minutes and seconds.
To perform elapsed time measurement
C to move the v Left Dial Hand to 0.
1.
Use
This indicates the Stopwatch Mode.
2.
Now you can perform either of following stopwatch operations.
You will not be able to perform any stopwatch operation while the hands are
moving to their initial positions after you enter the Stopwatch Mode.
B
B
D
(Restart)
(Stop)
Reset
B
Stop
A depressed (for about fi ve seconds)
C.
C.
C and then perform
A to return to regular
D
Reset
3
Hide quick links:
Advertisement
