Related Manuals for Ryobi RCS5145N
Summary of Contents for Ryobi RCS5145N
- Page 1 RCS5145N PETROL CHAINSAW Important! It is essential that you read the instructions in this manual before assembling, maintaining and operating this machine.
-
Page 2: General Safety Rules
Your chainsaw has been engineered and manufactured to Be sure that the saw chain stops moving when the Ryobi’s high standard for dependability, ease of operation, throttle control trigger is released. and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. -
Page 3: Maintenance Precautions
You must never modify or remove parts from this product or use parts not ■ Use extreme caution when cutting small-size brush recommended by Ryobi. This will increase the risk of and saplings because slender material may catch the injury. - Page 4 English (Original Instructions) include episodic blanching of fingers in response to cold, WARNING numbness and tingling. In extreme cases, it will cause loss of touch sensation. All chainsaw service, other than the items in the operator’s manual maintenance instructions, should be Anti-vibration system does not guarantee that you will performed by competent chainsaw service personnel.
- Page 5 If you (no more than 5 pulls). do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi Push choke lever all the way in. customer service for assistance.
-
Page 6: Specifications
DESCRIPTION SPECIFICATIONS 1. Front hand guard/Chain brake 2. Front handle 3. Engine cover Model name RCS5145N 4. Primer bulb 51cc 45 cm (18'') gasoline Description 5. Choke lever chain saw 6. Chain Weight - no bar, chain, fuel 5.3 kg... - Page 7 English (Original Instructions) WARNING WARNING The warnings and instructions in this section of the Kick-back occurs when the moving chain contacts operator’s manual are for your safety and to prevent an object at the upper portion of the tip of the guide serious personal injury.
-
Page 8: Starting The Engine
Premix unleaded petrol and 2-stroke engine lubricant in a clean container approved for petrol. Use Ryobi bar and chain lubricant. It is designed for chains and chain lubricating, and is formulated to perform ■ This engine is certified to operate on unleaded petrol over a wide temperature range with no dilution required. - Page 9 English (Original Instructions) 1. Place the chainsaw on level ground and ensure that STOPPING THE ENGINE no objects or obstructions which could come in contact See figure 15. with the bar and chain are in the immediate vicinity. Release the throttle trigger and let the engine return to 2.
-
Page 10: Work Area Precautions
English (Original Instructions) ■ Maintain a proper grip on the saw whenever the engine 4. Keep the engine at full throttle the entire time you are is running. The fingers should encircle the handle and cutting. the thumb be wrapped under the handlebar. This grip 5. -
Page 11: Adjusting Idling Speed
English (Original Instructions) FELLING TREES – HAZARDOUS CONDITIONS CAUTION See figure 27. Serious damage may occur to the engine if improper adjustments are made to the “L” and “H” needles. Do WARNING not force the “L” and “H” needles outside the adjustment range! Do not fell trees during periods of high wind or heavy precipitation. - Page 12 English (Original Instructions) PROPER PROCEDURE FOR TREE FELLING BUCKING See figure 28 - 31. See figure 33. Bucking is the term used for cutting a fallen tree to the 1. Pick your escape route (or routes in case the intended desired log length.
-
Page 13: Maintenance
English (Original Instructions) MAINTENANCE firm grip. Maintain secure footing and balance. ■ Keep the tree between you and the chain while REPLACING THE BAR AND CHAIN limbing. Cut from the side of the tree opposite the See figure 3. See figure 38 - 47. branch you are cutting. -
Page 14: Adjusting The Chain Tension
English (Original Instructions) 15. Release the tip of the guide bar and turn the chain CHAIN MAINTENANCE tensioning screw (M) 1/2 turn clockwise. Repeat this See figure 51 - 52. process until sagging does not exist. 16. Hold the tip of the guide bar up and tighten the bar WARNING mounting nuts (B) securely. - Page 15 English (Original Instructions) 6. Lift the file away from the steel on each return stroke. depth gauge clearances. 7. Put a few firm strokes on every tooth. File all left-hand ■ Every time the chain is filed, check the depth gauge cutters (A) in one direction.
- Page 16 English (Original Instructions) the carburettor and chamber as possible. WARNING NOTE: Be sure to pull the choke rod out to keep the Never run the saw without all the parts, including the carburettor from being contaminated. drivecase cover and starter housing, securely in place. 3.
-
Page 17: Chain Brake
English (Original Instructions) CHAIN BRAKE MAINTENANCE SCHEDULE Daily check before use See figure 71 - 72. Fuel mixture level ....Before each use ■ Remove the clutch cover and clean the chain brake Bar lubrication. -
Page 18: Troubleshooting
English (Original Instructions) TROUBLESHOOTING Problem Possible cause Solution Engine will not start (Make No spark. The spark plug could be cracked or damaged. sure ignition switch is in Replace the old spark plug with a new one and start position “I”). try to start again. - Page 19 English (Original Instructions) Engine starts but will not Check for lubricating function. Run at half throttle 30 to 45 seconds. Stop saw accelerate properly. and check for lubricant dripping from guide bar. If lubricant is present, the chain may be dull or bar may be damaged.
- Page 20 Techtronic Industries (Australia) Pty. Ltd. Level 1, 660 Doncaster Road Doncaster, VIC 3108, Australia Techtronic Industries New Zealand Ltd. 18-26 Amelia Earhart Avenue Mangere, Auckland 2022, New Zealand 960439011-02...