Two-Channel Operation; Parallel-Mono / Parallel-Mono; Mono-Bridge / Mono-Bridge - Camco VERTOX Series User Manual

3.9.5 Two-Channel Operation

With amplifiers A/B and C/D set to mono modes you will nearly have a normal
stereo amplifier with the exception that you are able to choose either to drive
minimum loads of 2 Ohms or 8 Ohms.

3.9.5. Parallel-Mono / Parallel-Mono

To drive two 2 Ohms loads just set the mode selectors to Parallel-Mono
operation.
P.8
USER MANUAL
VORTEX 3 QUADRO
VORTEX 3 QUADRO
A
+
Z ≥ 2 Ω
B
+
C
+
Z ≥ 2 Ω
D
+

3.9.5.2 Mono-Bridge / Mono-Bridge

With its mode selectors set to Mono-Bridge the VORTEX 3 QUADRO is able to
control high impedances.
VORTEX 3 QUADRO
A
+
Z ≥ 8 Ω
B
C
+
Z ≥ 8 Ω
D