Cambridge SoundWorks DTT250 Installation And Operating Instructions Manual page 15

Then make sure the speakers are
positioned so that the test sound can
be clearly heard.
Finally, adjust the front panel level
controls for the center, subwoofer and
rear speakers. Adjust each control so
its speaker achieves a balanced
output level with the left and right
satellites (which provide a fixed
"reference" output level).
All Decoder Amplifier functions
except for the level controls are
disabled while the test sound is
running.
MUSIC MOVIE FOURPOINT STEREO
4
CREATIVE
MULTI SPEAKER SURROUND
C
AMBRIDGE
S W
OUND ORKS
The speaker level controls operate at
all times. If desired, you may adjust
these controls during program material
to fine-tune the balance.
9. Mute: Mutes all output from the
DTT2500 Digital. Press the button once
to mute. Press a second time to restore
audio output.
The CMSS, Dolby Surround, Audio
Mode and Speaker Test buttons are
operable during mute.
PRO LOGIC
DOLBY
LL R
DIGITAL DIGITAL IN ANALOG IN
5
6
DOLBY SURROUND AUDIO MODE
POWER
MASTER CENTER
1 2
7 8 9
SPEAKER TEST MUTE
SUBWOOFER
SURROUND
3
15