Marking Waypoints - Garmin BMW Motorcycles Navigator Owner's Manual And Reference Manual

Reference

Marking Waypoints

A waypoint is stored in memory as soon as the
'Waypoint Marked' Page appears.
There are approximately 50 waypoint symbols to choose
from. These symbols are used to mark the waypoint's
position on the Map Page.
26
Marking Your Location as a Waypoint
At times you may fi nd it useful to mark a location, so that you can return to it again later. These
locations are called 'Waypoints'. The Navigator can hold up to 500 Waypoints.
To mark your location as a Waypoint:
1. Press and hold ENTER. The 'Waypoint Marked' page appears, with a default three-digit name for
the new waypoint in the upper-left portion of the page. The Navigator captures the location from the
instant at which you pressed ENTER, so you do not need to be concerned about moving around or
losing satellite reception, your Waypoint is safely stored.
To rename the Waypoint:
1. Use the ROCKER KEYPAD to select the name and press ENTER.
2. Enter the new waypoint name using the ROCKER KEYPAD, and press ENTER.
Each waypoint may also be assigned a custom waypoint symbol for easy recognition on the Map
Page.
To change the Waypoint symbol:
1. Highlight the Waypoint symbol (immediately to the left of the waypoint name) and press ENTER. Use
the ROCKER KEYPAD to select the desired symbol.
2. Press ENTER when you fi nd the most appropriate symbol. The new Waypoint is now stored in
memory.
At the bottom of the Waypoint Marked Page there are three selections that can be made:
Delete - deletes the waypoint.
Show Map - Shows the waypoint on the Map Page.
Route To It - Tells the unit that you want to navigate to that waypoint.