Table of Contents
Advertisement
a PC for increased control over system
operations.
Unless otherwise specified at the time of
purchase, all MultiPro IQ Express Docks
are shipped from Honeywell Analytics
configured with the standard calibration
gas settings, which are shown in section
1.7.
Whenever the user chooses to activate
the MultiPro IQ Express without an active
PC connection, the dock will operate with
the last set of calibration gas settings that
were uploaded into the instrument.
Note: Do not connect the MultiPro IQ
Express to the PC until all three items
on the MultiPro IQ Express Installation
disc have been installed.
2.1 Installation Overview
A number of software programs and a
PostgreSQL Database Server must be
installed to control the MultiPro IQ
Express.
1. Install the PostGreSQL Database
Server and the IQ Administrator Pro
Program as described in the IQ
Administrator Pro Reference Manual.
2. Install the IQ Database Manager Pro
program as described in the IQ
Database Manager Pro Reference
Manual.
3. Install the MultiPro IQ Express PC
Software as described below in
section 2.4.
4. Create a default PostgreSQL
database as described in section 6 of
the IQ Administrator Pro Reference
Manual.
5. If connecting the dock to the PC via
USB, follow the instructions in section
2.6. If connecting the dock via
Ethernet, follow the Ethernet
Instructions booklet.
6. Follow the instructions in section 2.7
for providing calibration gas and fresh
air to the dock(s).
7. For docks that will be connected
permanently by USB port, configure
the docks by connecting them to the
PC's USB port. If the instrument is to
be connected via Ethernet, follow the
Ethernet Instructions that came with
the dock.
2.2 IQ Administrator Pro and
PostgreSQL Database Server
Installation
The IQ Administrator Pro Program is
contained on the IQ Express Installation
Disk. Place the disk in your PC's CD tray
and follow the installation instructions
given in the IQ Administrator Pro
Reference Manual that is included with
the IQ Express.
2.3 IQ Database Manager Software
Installation
The Database Manager Pro Program is
contained on the IQ Express Installation
Disk. Place the disk in your PC's CD tray
and follow the installation instructions
given in the IQ Database Manager
Software manual that is included with the
IQ Express.
2.4 MultiPro IQ Express PC
Software Installation
The PostgreSQL Database Server and IQ
Database Manager Pro Programs should
be installed before proceeding to step 1.
Note: Screens shown below may be
slightly different depending on your
PC's operating system.
1. The Software Installation screen
should come up automatically once
the installation of Database Manager
is complete. If this screen does not
come up, access the CD drive using
Windows Explorer.
2. Select "MultiPro IQ Express Pro" and
click "Install". The InstallShield Wizard
will begin the installation.
6
Advertisement
Table of Contents
