This command has no arguments or keywords
Example
The following example shows how to display the H323 parameters:
Console>show h323 <Enter>
h323 display_name = 'Customer'
h323 h245_term_type = 60
h323 rtp_port_base = 30000
h323 out_fast_start = off
h323 in_fast_start = off
h323 h245_tunneling = off
h323 cisco_t38
h323 callSignalPort = 1720
h323 nat_call
h323 call_name
h323 local_alert = off
h323 default_dtmf = H323 V2 Signal
No IMTC IP Defined!
h323 dns_ip
h323 gk_mode
h323 h245_timeout = 30000
h323 term_id
Console>
24
show version
The show version command displays the version of various software
components of the TVP-224HR.
Syntax Description
This command has no arguments or keywords
25
set h323 alias {add
The set h323 endpoint_prefix command is used to create and delete aliases
that are registered with the Gatekeeper.
Syntax Description
add
del
alias
all
= on
= on
=
= 0
= off
=
| del} {alias|all}
Create an alias alias
Delete a previously created alias alias
Alias to be created or deleted
Delete all previously created alias. This
optional applies to del only