Air Filter; Fuel Filter - Echo SRM - 311 Operator's Manual

WARNING
Allow the unit to completely cool before performing any mainte-
nance activity.

AIR FILTER

Level 1.
Tools required: 25-50 mm (1 or 2 in.) Cleaning brush.
Parts required: 90030 REPOWER
1. Close choke (Cold Start Position [
entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from the air cleaner area.
2. Remove the air cleaner cover. Clean and inspect the element for
damage. If element is fuel soaked or very dirty, replace.
3. If element can be cleaned and reused, be certain it:
• still fits the cavity in the air cleaner cover.
• is installed with the original side out.
NOTE
Carburetor adjustment may be needed after air filter cleaning/
replacement.

FUEL FILTER

Level 1.
Tools required: 200-250 mm (8 - 10 in.) length of wire with one end
bent into a hook. clean rag, funnel, and an approved
fuel container.
Parts required: 90030 REPOWER
WARNING
Fuel is VERY flammable. Use extreme care when mixing, storing or
handling.
1. Use a clean rag to remove loose dirt from around fuel cap and
empty fuel tank.
2. Use the "fuel line hook" to pull the fuel line and filter from the tank.
3. Remove the filter from the line and install the new filter.
G
DANGER
TM
AIR & FUEL FILTER KIT.
]). This prevents dirt from
TM
AIR & FUEL FILTER KIT.
DANGER
T /B
RASS RIMMER
O
PERATOR
C
RUSH UTTER
' M
S ANUAL
23