Switching On/Off The False Alarm Preventative Function; Trap Point - Uniden GPS9000NZ Owner's Manual

GPS Qk newfont 2/13/02 4:05 PM Page 24
Switching On/Off the False Alarm Preventive
Function
Pressing the Alert Key will cancel a stored false location caused
by actual police radar use. Press the Alert Key when an actual
police gun is in use so that the location will not be stored as a
falsing location.
EXIT/ALERT
1. Press
the area for the first time. The false alarm preventive function is
switched off, and the display changes accordingly as follows:

Trap Point

The Trap Point is a user programmable location that can be used
to mark a common speed trap location. Once a location is
marked, the next time you approach the location, an alarm will
sound. You can mark up to 1,000 locations.
SELECT/TRAP
Press
location you want to mark.
After "Trap" and the marked
number indication disappears
from the LED display, the
display returns to the Normal
mode marked as shown
below.
When you approach the previously marked location, the detec-
tor sounds alert tones and changes the LED colour on the dis-
play in 3 levels as follows.
Distance
(Radius/Metres)
Level 1 800
Level 2 400
Level 3 160
while receiving signals when driving in
GREEN
EXIT/ALERT
GREEN
F
2 sec later
GREEN
EXIT/ALERT
at the
Alert
Tone Time
3 sec
3 sec
3 sec
22
GREEN
SELECT/TRAP
GREEN
RED
2sec later
GREEN
RED
LED Alert
Color Display Time
GREEN 3 sec
ORANGE 3 sec
RED 3 sec