Interrupting Playback (Pause); Cd-Changer Mode; Switching To Cd-Changer Mode; Selecting Cds - Blaupunkt Melbourne SD27 Operating And Installation Instructions

SD/MMC card mode | CD-changer mode
Cancelling Scan and continuing
listening to a track
u Briefl y press the M/OK button >.
The currently scanned track will then con-
tinue to be played normally.

Interrupting playback (PAUSE)

u button =.
Press the 3
"PAUSE" appears on the display.
Cancelling pause
u button =.
Press the 3
Playback is continued.

CD-changer mode

Note:
Information about handling CDs, insert-
ing CDs and operating the CD changer
can be found in the operating instruc-
tions supplied with your CD changer.

Switching to CD-changer mode

u press the SRC button ? repeatedly
until the display shows "CDC/AUX-IN".
The device starts playing the fi rst CD that
the CD changer detects.

Selecting CDs

To move up or down to another CD,
u
press the or
eral times.
18
button 5 once or sev-
Note:
The device will ignore empty CD slots in
the changer and slots containing invalid
CDs.

Selecting tracks

To move up or down to another track on the
current CD,
u press the or button 5 once or sev-
eral times.

Fast seek tuning (audible)

To fast search backwards or forwards,
u press and hold the or button 5 for
longer than two seconds.
Seek tuning continues as long as you hold
the button pressed.
Confi guring the display
Three options are available for the display in
CD changer mode:
•
Track number and playing time
•
Track number and time
•
CD number and track number
To switch between the different display op-
tions,
u
press the DIS
Repeating individual tracks or
whole CDs (REPEAT)
You can repeatedly play the current track or
all tracks on the current CD.
button 9.