Implementing Carrier Grade NAT on Cisco IOS XR Software
Command or Action
Step 6
Example:
What to Do Next
•
Configuring 1:1 Redundancy
Perform the following steps to configure 1:1 redundancy on CGSE or CGSE Plus cards.
SUMMARY STEPS
1. configure
2. service cgn instance-name
3. service-location preferred-active node-id [preferred-standby node-id]
4. end or commit
DETAILED STEPS
Command or Action
Step 1
configure
Example:
RP/0/RP0/CPU0:router# configure
OL-32659-01
Purpose
Enters global configuration mode.
Cisco IOS XR Carrier Grade NAT Configuration Guide for the Cisco CRS Router, Release 5.2.x
Configuring the Policy Functions for the Carrier Grade NAT
Purpose
configuration session, and returns the router to
EXEC mode.
◦ Entering no exits the configuration session and
returns the router to EXEC mode without
committing the configuration changes.
◦ Entering cancel leaves the router in the current
configuration session without exiting or
committing the configuration changes.
• Use the commit command to save the configuration
changes to the running configuration file and remain
within the configuration session.
47