Basic Installation Steps - Jensen Carbon 65C Installation Manual

INSTALLATION

Basic Installation Steps

Step 1 : Remove existing speaker.
Step 2 : Position new speaker and align with existing mounting
holes, when possible.
Step 3 : Attach the positive (+) and negative (-) speaker terminals
to both the woofer and tweeter (see FIGURE 2). Be sure
to observe proper polarity when connecting the wires.
Step 4 : If not using factory grilles, attach grille.
Step 5 : Mount speaker (using factory hardware when possible).
Step 6 : Reconnect negative battery terminal.
FIGURE 1 - DOOR PANEL INSTALLATION
Grille Speaker
FIGURE 2 - CONNECTING SPEAKER WIRES
FIGURE 3 - REAR DECK INSTALLATION
Door Panel
3
Copper Wire = Positive
Silver Wire = Negative