46
INTRODUCTION
The trip computer provides a series of in-
formation relating to the route (e.g. time,
distance, speed, fuel consumption). Some
of this information is only available with the
navigation function activated and depends
on the navigation route set.
IMPORTANT Some information/operations
described below are only possible/available
with the ignition key in the MAR position.
fig. 31
TRIP COMPUTER
To access the main trip computer screen,
press the TRIP button.
All the measurements are shown in the dis-
play through symbols (see fig. 31).
By turning the OK button/knob it is possi-
ble to select information relating to:
❍ Trip A (by selecting the letter "A") or for
Trip B (by selecting the letter "B"). The
display will show the following informa-
tion:
– Route distance (km or miles)
– Consumption (km/l, mpg or l/100km)
– Average speed (km/h or mph)
– Journey time (hh:mm)
❍ Instant information (car symbol). The
display will show the following informa-
tion:
– Range
– Instant consumption
– Distance to the destination
A0J2028g
TRIP COMPUTER
SPECIFIC MENU
With the trip computer function activated it
is possible to access the specific Menu by
pressing the OK button/knob. The display
will show the following screen (fig. 32).
fig. 32
A0J2015g