Connections - Western Digital TV User Manual

**2-channel only. 2+channel signal is sent via digital pass through to a receiver. Manufactured under license from
Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
***Single layer only.
****Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS is a registered trademark & the DTS logos and Symbol
are trademarks of DTS, Inc.
Plug-n-Play USB 2.0 Support*
• USB storage device with a USB connector
• Portable media players with USB connector
• Digital cameras/camcorders with USB connector
*For a list of tested, compatible USB devices, see Article #2581 in our knowledge base at support.wdc.com.
USB Storage File System Support
• NTFS
• FAT/FAT32
• HFS+

Connections

1 2
Item Component
1 USB port 1
2 Reset switch
3 Power jack
4 USB port 2
5 HDMI port
6 Toslink (optical)
audio port
7 Ethernet port
8 Composite jack
9 Component jack
Note: The WD TV HD Media Player does not support USB hubs.
3 4
Description
Supports connection of removable storage devices, portable
media players, digital cameras with USB connectors, and USB
wireless adapters.
Press one second to reset. Press and hold 10 seconds to
toggle between NTSC and PAL. (using a fine-tipped stylus or
the unfolded end of a paperclip).
Connects the power cable
The same function as USB port 1
Connects to your TV's HDMI port (HDMI cable sold
separately)
Connects to your AV receiver (Toslink cable sold separately)
Supports LAN connection for wired Internet access.
Connect to your TV's analog video and audio jacks
Connect to your TV's component (YPbPr) terminals.
WD TV Live HD Media Player
5 6 7 8
FEATURES AND FUNCTIONS – 9
User Manual
9