Introduction; Localview And View Software - Honeywell Rapid Eye Installation Manual

Introduction

LocalView and View Software

Document 800-02607V3 Rev A
11/09
This chapter provides an overview of a typical Rapid Eye Multi-Media DVR installation
process:
• Connecting cameras to your Rapid Eye Multi-Media DVR
• Connecting the Multi-Media DVR to a network, telephone line, or both
• Configuring the Multi-Media DVR
Note Experienced installers may wish to go directly to
Chapter 5, Site Hardware.
A Multi-Media DVR can be operated:
• Without a personal computer (PC). Connect a VGA monitor and mouse directly to
the DVR to use LocalView, onsite.
• With a PC, for remote access using View and Admin software. For more information,
see Chapter 2, Installation.
Note Installers need to use LocalView briefly to change the IP Address of the DVR.
Availability of LocalView on V9 DVRs Offering Video Analytics
LocalView is now fully supported by Rapid Eye's latest V9 software. Earlier V9 software
cannot access full LocalView features; only network configuration is available (as in
LocalView to Modify the IP Address of the DVR
Visit www.honeywellvideo.com/support/downloads/downloads_dvr.html
latest Rapid Eye software.
Chapter 2, Installation
on page 33).
to download the
1
and/or
Using
19