Fl Inverter Board - Toshiba Satellite A80 Maintenance Manual

4 Replacement Procedures

4.21 FL Inverter Board

Removing the FL Inverter Board
To remove the FL inverter board, first remove the battery pack, the display assembly, display mask,
and LCD module, then follow the step below.
1. Remove one black M2x3 screw securing the FL invert board to the LCD display assembly.
Figure 4-39 Removing the FL inverter board
Installing the FL Inverter Board
To install the FL inverter board, follow the steps below and refer to the figure in the preceding section.
1. Secure one black M2x3 screw connecting the FL inverter board to the LCD display assembly.
2. Reassemble the computer.
Satellite A80 Series Maintenance Manual 4-43