Table of contents
Packing ................................................................................ 2
Symbols ............................................................................... 3
Kickback ......................................................................... 6
Maintenance ................................................................... 8
First aid ........................................................................... 8
Technical data ..................................................................... 9
Chain brake .................................................................. 11
Cold start ...................................................................... 14
Thank you for purchasing a MAKITA product!
Congratulations on choosing a MAKITA chain saw! We are confi dent
that you will be satisfi ed with this modern piece of equipment.
The MAKITA-chain saws are light, handy saws with high
performance, a good power-to-weight ratio, and a wide range
of speeds for top utility.
The long-life "Nikasil"-lined cylinder, tough die-cast magne-
sium crankcase with sturdy, easy-to-operate central guide-bar
mounting and rugged metal spike bar make this saw a reliable,
hard-working tool.
The automatic chain lubrication with variable-fl ow oil pump
and maintenance-free electronic ignition ensure trouble-free
operation, while the hand-saving anti-vibration system and
ergonomic grips and controls make work easier, safer, and
less tiring for the user.
MAKITA chain saws are equipped with the latest safety fea-
tures and meet all national and international standards. These
features include: hand guards on both handles, grip throttle lever
lock, chain catch, safety saw chain, and chain brake. The chain
brake can be actuated manually, and is also inertia-actuated
automatically in case of kickback.
The following industrial property rights apply: US 4465440, US
5411382, EP 0236858, EP 0560201, GBM 8710075, GBM
8809928, GBM 9203378, GBM 29616652.
In order to ensure the proper functioning and performance
of your new chain saw, and to safeguard your own per-
sonal safety, it is imperative that you read this instruction
manual thoroughly before operation. Be especially careful
to observe all safety precautions! Failure to observe these
precautions can lead to severe injury or death!
Packing
Your MAKITA chain saw comes delivered in a protective card-
board box to protect against shipping damage.
Cardboard is a basic raw material and is consequently reuseable
or suitable for recycling (waste paper recycling).
RE Y
2
Page
Warm start .................................................................... 14
MAINTENANCE ................................................................. 17
Trouble shooting .............................................................. 23
Accessories .................................................................. 24
EU Conformity Declaration
The undersigned, Tamiro Kishima and Rainer Bergfeld, as autho-
rized by DOLMAR GmbH, declare that the MAKITA machines,
Type
DCS520
DCS5200
manufactured by DOLMAR GmbH, Jenfelder Str. 38, 22045
Hamburg, Germany, conforms to the basic safety and health
requirements of the applicable EU Directives:
EU Machinery Directive 98/37/EG, EU EMC Directive 2004/108/
EG, Outdoor Noise Directive 2000/14/EG.
Starting on 29 Dec. 2009, Directive 2006/42/EG will come into
force, replacing Directive 98/37/EG. This product meets the
requirements of the new Directive.
The most important standards applied to properly meet the
requirements of the above EU Directives were: EN 11681-1,
CISPR 12, EN 50082-1, DIN VDE 0879 T1.
The conformity assessment procedure 2000/14/EG was perfor-
med per Annex V. The measured sound power level (L
dB(A). The guaranteed sound power level (L
The EU Type-Examination Certifi cate was performed by: Deut-
sche Prüf- und Zertifi zierungsstelle für Land- und Forsttechnik,
Max-Eyth Weg 1, D-64823 Groß-Umstadt.
The technical documentation is on fi le at DOLMAR GmbH, Ab-
teilung FZ, Jenfelder Strasse 38, 22045 Hamburg, Germany.
Hamburg, 29.12.2009 for DOLMAR GmbH
Tamiro Kishima
Managing Director
EU prototype test certifi cate No.
(026) K-EG-2009/4661
(027) K-EG-2009/4662
Rainer Bergfeld
Managing Director
Page
) is 112
wa
) is 113 dB(A).
d