Chapter 3 Services And Applications; Packet Data Service; Sms Service - Huawei E220 System Description

Hide thumbs Also See for E220:

Table of Contents

System Description of Huawei E220 USB Modem

Chapter 3 Services and Applications

The HUAWEI E220 USB Modem supports circuit domain data service based on

UMTS/GSM and packet domain data service based on HSDPA/UMTS/EDGE/GPRS.

After connect the USB Modem and the computer with a USB cable; install E220 USB

Modem drive and corresponding modem on the computer; config APN and set up link,

a user may send/receive Emails, browse the Internet, and download files through an

established wireless data channel.

Packet data service is usually launched by entering "*99#" or "*98#". A user may

choose a network type (3G preferred, GPRS/EDGE preferred, 3G only, GPRS/EDGE

only) on the "Choose Connection Type" of the dashboard. The operating procedure for

the circuit data service and packet data service are almost the same with the exception

of their access numbers. You should consult the local service provider for the access

number.

The HUAWEI E220 USB Modem supports SMS service based on CS and PS domain of

GSM and UMTS. By SMS settings of the dashboard, a user may choose a bearing

domain (packet domain or circuit domain) for sending messages.

The HUAWEI E220 USB Modem supports message writing, sending and receiving,

and group transmission of messages to up to 20 phone numbers simultaneously. The

dashboard provides powerful message management function, including setting Outbox,

Inbox, Draft box, Trash box and Report box; sorting by phone number or by time;

exchanging SMS information between the dashboard and a USIM/SIM card.

Huawei Technologies Proprietary

3-1

Chapter 3 Services and Applications

Table of Contents