Table of Contents
Advertisement
Section - Configuration
User:
Select a user from the drop-down menu or
check All Accounts. Anonymous will always
be listed as a user.
Path:
Click Open and select the folder from the
interneal/USB drive that you would like to
create the rule for.
Check the Root box to select the root level of
Root:
all the drives at once.
Select Read Only or Read/Write from the
Authority:
drop-down menu.
Click Add to add the rule.
Add:
Select the maximum number of users allowed
Max User:
to connect via FTP at one time from the drop-
down menu.
Select the idle time (1-10 minutes). Users will
Idle Time:
be disconnected when idle for the specified
amount of time.
Port:
You may change the port used for FTP. The
default port is 21.
Select Unlimited or enter a data rate (x10 KB) for restricted data flow. This setting is only necessary where
Flow Control:
network traffic is significant and can be affected by FTP server activity.
D-Link DSM-600 User Manual
FTP Server
6
Advertisement
Table of Contents
