Service Mode Table 1; Dvd Self Diagnostic Function-Error Code - Panasonic DVD-KA84GA Service Manual

DVD-KA84GA / DVD-KA84PU
9.3.

Service Mode Table 1

Pressing buttons PLAY, RETURN and TOP MENU at the same time at the unit. Service mode menu will be display.
Select menu by cursor and press the ENTER button to activate the service modes.
Player buttons
SET
PLAY
+
RETURN
+
TOP MENU
Lighting Confirmation Function Lighting Confirmation Function of Display Tube
Write LASER Current Value Writing the laser drive current value after replacing the optical
9.4.

DVD Self Diagnostic Function-Error Code

Error Error Content
Code
U, H error
U11 Focus error
U15 DVD-R not finalized
H01 Tray loading error
H02 Spindle servo error
H03 Traverse servo error
H04 Tracking servo error
H05 Seek error
H07 Spindle motor drive
error
DSC related
F500 DSC error
F501 DSC not Ready
F502 DSC Time out error
F505 DSC Attention error
F506 Invalid media
ODC related
F600 Access failure to
management
information caused by
demodulation error
F601 Indeterminate sector ID
requested
F602 Access failure to LEAD-
IN caused by
demodulation error
F603 Access failure to
KEYDET caused by
demodulation error
F610 ODC abnormality
F612 No CRC OK for a
specific time
F630 No reply to KEY DET
enquiry
Display
Display Error Code Displaying the UHF display F_ _ _
Display Jitter Jitter check, tilt adjustment
*Display shows xx_yyyzz
"xx" and "zz" shown to the right have nothing to do with the
jitter value. "xx" is the error counter, while "zz" is the focus
drive value.
Refer to section 11.4. for Optical Pickup Tilt Adjustment
Procedure.
Display Region Checking the region numbers and broadcast system
Display Version Checking the program version
Display DVD/CD LASER Checking the laser drive current
Current
pickup (do not use for anything other than optical pickup
replacement)
Additional error explanation
(Spindle servo, DSC SP motor, CLV servo error)
DSC stops in the occurrence of servo error (start
up, focus error, etc)
DSC-system computer communication error
(Communication failure caused by idling of DSC)
Similar disposal as F500
Similar disposal as F500
Disc is flipped over, TOC unreadable,
incompatible disc
Operation stopped because navigation data is
not accessible caused by the demodulation
defect
Operation stopped caused by the request to
access abnormal ID data
LEAD IN data unreadable
Access failure to CSS data of disc
No permission for command execution
Access failure to ID data in DVD series
(for internal use only)
Application
Defect 1
OPU
DV5.0
(IC3001)
OPU
OPU
DISC
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
DV5.0
(IC3001)
24
Note
Refer to section 9.2.
Self-Diagnosis Function
(UHF Display).
Refer to section 11.4.
Optical adjustment.
Check the IC3008
FLASH ROM program.
Refer to section 8.5.
Optical Pickup
Replacement Procedure.
Defect 2 Defect 3 Defect 4
DV5.0 DV5.0 servo
(IC3001) (IC3001)
DV5.0
(IC3001)
DV5.0 DV5.0 servo
(IC3001) (IC3001)
DV5.0 DV5.0 servo
(IC3001) (IC3001)
DV5.0 DV5.0 DV5.0
(IC3001) (IC3001) (IC3001)
DV5.0 DV5.0
(IC3001) (IC3001)
DV5.0 DV5.0
(IC3001) (IC3001)
drive
drive
drive