Table of Contents
Advertisement
Steering Wheel
5
• Fit the steering wheel cap into the center of the steering wheel .
Make sure the screw holes are aligned .
• Insert two #8 x 1" screws into the holes in the steering wheel
cap and tighten .
Lock Nut
6
• Position the vehicle on its side .
• Fit a
lock nut onto the end of the steering column .
3
/
"
16
• While supporting the steering column tighten the lock nut with
the assembly tool .
• Turn the vehicle upright .
ASSEMBLY
Steering Wheel Cap
BOTTOM VIEW
Activity
Panel
7
• Using safety scissors, separate the activity panel and the instru-
ment panel . Dispose of the plastic connector .
• Insert and "snap" the base of the shifter into the activity panel .
8
• Fit the tabs on the bottom of the instrument panel into the notch-
es in the dash opening to the left side of the steering wheel .
• Press near the top of the instrument panel to "snap" in place .
Shifter
Instrument Panel
N9356pr-0920
Advertisement
Table of Contents
