Gigaware 26-1030 User Manual page 5

2
Connect to PS2/PlayStation
1. Plug the receiver into the console's port.
2. Turn on the console and the controller.
3. The controller will search for a signal and the RX
LED will light up orange when the connection has
been made.
OR
n
Notes:
• TURBO LED and MODE LED flash once when you
turn on the controller. The green TURBO LED turns
off after successful connection.
• If automatic connection doesn't work, you can try
manually. Press CONNECT on the receiver, then
press SELECT and L3 (left analog stick) on the
controller. If the orange POWER LED lights, the
connection is successful.
• Repeat steps 1-3 if the connection fails again. If
there is still no connection, check that your video
game console is set up correctly.
POWER (Green LED)
RX (Orange LED)
5
CONNECT