Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Turn bulb 2 clockwise to install
it in the bulb housing.
OE
Working from the inboard side,
insert the glass into the bulb
housing and close the housing.
OE
Install screw 1.
Replacing auxiliary-
headlight bulbs
with auxiliary headlights
The procedure described
below applies only to aux-
iliary headlights with halogen
bulbs. The LED auxiliary head-
lights can only be replaced as
complete units.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Disconnect plug 1.
Slacken screw 2.
8
OE
127
z