Typical Vlan Management Id Configuration Scenarios - HP WL520 User Manual

1. Open your browser and enter the IP address of your access point. Type in your password. Click OK.
2. Click the Configure button at the left and Select the Interfaces tab.
unique unique unique unique
3. Enter a Network Name (SSID) for each NIC.
4. Select the Network > VLAN tab.
5. Set the VLAN UserID for one NIC to 0.
6. Set the VLAN User ID for the other NIC to a value between 1 and 4094.
7. Set VLAN Status to Enable.
8. Configure the wireless client with one of the two Network Names based on VLAN membership.
setting up one tagged vlan workgroup setting up one tagged vlan workgroup
setting up one tagged vlan workgroup setting up one tagged vlan workgroup
The VLAN feature enables all wireless clients that access the network through the same HP WL520, to be configured as
members of the same VLAN. In this scenario, each wireless NIC is configured with the same VLAN ID. The same VLAN header
or tag is then applied to all traffic received from wireless clients and transmitted on the wired or wireless backbone. All wireless
clients become members of the same VLAN.
To configure this scenario, set up one, large workgroup:
VLAN ID for Wireless NIC in Slot A = 0 or a number between 1 and 4094
VLAN ID for Wireless NIC in Slot B = 0 or a number between 1 and 4094
1. Open your browser and enter the IP address of your access point. Type in your password. Click OK.
2. Click the Configure button at the left and Select the Interfaces tab.
unique unique unique unique
3. Enter a Network Name (SSID) for each wireless network interface card (NIC).
4. Select the Network > VLAN tab.
5. Set the VLAN UserID for the NIC in Slot A to a value between 1 and 4094.
6. Set the VLAN UserID for the NIC in Slot B to the same value configured for the NIC in Slot A.
7. Set VLAN status to Enable.
8. Configure the wireless client with one of the two Network Names based on VLAN membership.

typical vlan management id configuration scenarios

typical vlan management id configuration scenarios typical vlan management id configuration scenarios typical vlan management id configuration scenarios
making the hp WL520 making the the hp hp WL520 WL520 a vlan member to control management access WL520 a vlan member to control management access
making the maki ng hp
Management access to the HP WL520 can easily be secured by making management stations or hosts and the HP WL520
device itself members of a common VLAN. Simply configure a non-zero management VLAN ID and enable VLAN to restrict
management of the HP WL520 device to members of the same VLAN.
1. Open your browser and enter the IP address of your access point. Type in your password. Click OK.
2. Click the Configure button at the left and Select the Network>VLAN tab
3. Set the VLAN Management ID to a value between1 and 4094 (a value of 0 disables VLAN management).
4. Set VLAN Status to Enable.
a vlan member to control management access a vlan member to control management access
VLAN Support
4-7