Related Manuals for Omega WT-3100
Summary of Contents for Omega WT-3100
- Page 1 User’ s Guide Shop online at omega.com e-mail: info@omega.com For latest product manuals: omegamanual.info WT-3100 Controlled Open Loop Wind Tunnel...
- Page 2 Approach Directives. OMEGA will add the CE mark to every appropriate device upon certification. The information contained in this document is believed to be correct, but OMEGA accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.
-
Page 3: System Utility
The WT-3100 test section can be accessed from the front door for mounting of the boards. A unique internal rail guides provide mechanisms for installation of test specimen of different sizes (e.g., PCB, heat sink). Installation of different fan trays can be provided with the system to accommodate a broad range of velocities that maybe required for different testing applications. -
Page 4: System Components
Data Center- View data and monitor events at the data center (optional accessory) SYSTEM COMPONENTS The part numbers identified in Figure 1 show the system components of the WT-3100. These part numbers are described below: Test Section Instrument ports Fan tray... - Page 5 Figure 1: The WT-3100 System Components...
-
Page 6: System Operation
Release the clamps on front door to have access to the test section. Mount your specimen (e.g., component, PCB or heat sink) in the test section. Clamp the door back on the WT-3100. Place flow measurement instrument in the instrument port. -
Page 7: Velocity Profile
WT-3100 test section, top view Velocity measurement quadrant Velocity Distribution for one quadrant of Velocity Distribution for one quadrant of the WT-3100 Wind Tunnel Cross Section the WT-3100 Wind Tunnel Cross Section at 150 ft/min at 800 ft/min... - Page 8 Velocity – Velocity – X (mm) Y(mm) nominal velocity, nominal velocity, 150 (ft/min) 800 (ft/min) Velocity distribution at the inlet of the test section for WT-3100 Wind Tunnel...
- Page 9 Department will issue an Authorized Return (AR) number immediately upon phone or written request. Upon examination by OMEGA, if the unit is found to be defective, it will be repaired or replaced at no charge. OMEGA’s WARRANTY does not apply to defects resulting from any action of the purchaser, including but not limited to mishandling, improper interfacing, operation outside of design limits, improper repair, or unauthorized modification.
- Page 10 Where Do I Find Everything I Need for Process Measurement and Control? OMEGA…Of Course! Shop online at omega.com TEMPERATURE Thermocouple, RTD & Thermistor Probes, Connectors, Panels & Assemblies Wire: Thermocouple, RTD & Thermistor Calibrators & Ice Point References Recorders, Controllers & Process Monitors...