PAUSE LIVE TV
You can pause the live TV programme you are watching
using this unit's tuner and resume later by temporarily
saving it on the HDD.
≥PAUSE LIVE TV also works when watching a programme
via external input.
Select the HDD drive to perform this function correctly.
1
While watching TV
Press [;] to pause.
≥"PAUSE LIVE TV" appears on the unit's display.
Pause
20:35
20:35
2
When you want to resume
Press [1] (PLAY/a1.3).
≥You can perform search or Quick View, etc.
≥If temporary save stops (
performed by that point.
PLAY
20:35
≥When watching a programme via external input,
press [STATUS
].
Play
1 The time that you can rewind the live programme.
2 The amount of time temporarily saved on HDD
(maximum: 1.5 hours).
3 The time of the current playback position.
4 The time which is 1.5 hours after PAUSE LIVE TV
started.
≥After 1.5 hours from PAUSE LIVE TV started,
current time is displayed.
22:05
right), playback will be
21:30
To stop PAUSE LIVE TV
1 Press [∫].
2 Select "Yes", then press [OK].
≥ Temporary save stops in the following cases:
– When recording of the watching programme is started
– When 2 programme simultaneous recording is started
– When performing PAUSE LIVE TV for more than 8 hours (This may
vary depending on the HDD free space.)
– When save time exceeds 1 hour with no HDD free space
≥ This function does not work in the following cases:
– When the clock is not set
– While recording 2 programmes simultaneously
– While copying
– While watching a programme being recorded
– When a radio programme is selected
≥ You can operate this unit with the TV remote control by using VIERA
Link (
64).
Refer to the TV operating instructions for operation.
22:05
23
VQT2X37