Connecting The Notebook To The Port Replicator - Fujitsu Siemens Computers LIFEBOOK P Series Easy Manual

Working with the notebook

Connecting the notebook to the port replicator

► Switch the notebook off.
► Unplug the mains plug of the mains adapter from the mains socket.
► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.
Make sure that the covers on the LAN port, modem port and monitor port are fully in place.
i
► Align the docking connectors as shown.
► Press down on the notebook's rear corners so that it may lock into position.
► Connect the mains adapter cable to the DC jack (DC IN) of the Port Replicator (1).
► Connect the power cable to the mains adapter (2).
► Plug the power cable into the mains socket (3).
48 A26391-K223-Z121-1-7619, edition 1