NETGEAR RangeMax WPN824 Reference Manual page 71

Hide thumbs Also See for RangeMax WPN824:
Table of Contents

Advertisement

Reference Manual for the RangeMax Wireless Router WPN824
This screen shows the following parameters:
Table 6-1.
Wireless Router Status Fields
Field
Account Name
Hardware Version
Firmware Version
Internet Port
MAC Address
IP Address
DHCP
IP Subnet Mask
Domain Name Server
LAN Port
MAC Address
IP Address
DHCP
IP Subnet Mask
6-2
Description
This field displays the Host Name assigned to the router.
This is the version of the router hardware.
This is the version of the current software the router is using. This will
change if you upgrade your router.
These parameters apply to the Internet (WAN) port of the router.
This field displays the Media Access Control address, the physical
address, being used by the Internet (WAN) port of the router.
This field displays the IP address being used by the Internet (WAN) port
of the router. If no address is shown, or is 0.0.0.0, the router cannot
connect to the Internet.
If set to None, the router is configured to use a fixed IP address on the
WAN.
If set to DHCP Client, the router is configured to obtain an IP address
dynamically from the ISP.
This field displays the IP Subnet Mask being used by the Internet (WAN)
port of the router. For an explanation of subnet masks and subnet
addressing, see
"Internet Networking and TCP/IP Addressing" in
Appendix
B.
This field displays the Domain Name Server (DNS) addresses being
used by the router. A DNS translates human-language URLs, such as
http://www.netgear.com, into IP addresses.
These parameters apply to the Local (LAN) port of the router.
This field displays the Media Access Control address, the physical
address, being used by the LAN port of the router.
This field displays the IP address being used by the Local (LAN) port of
the router. The default is 192.168.1.1
Identifies if the router's built-in DHCP server is active for the LAN-
attached devices.
This field displays the IP Subnet Mask being used by the Local (LAN)
port of the router. The default is 255.255.255.0
v1.0, November 2005
Maintenance

Advertisement

Table of Contents
loading

Table of Contents