Sony STR-DA5200ES Service Manual page 17

Remote commander
You can use the supplied remote RM-AAL006 to operate
the receiver and to control the Sony audio/video
components that the remote is assigned to operate.
RM-AAL006
Name Function
A AV ?/1 (on/
Press to turn on or off the audio/video
components that the remote is assigned to
standby)
operate.
If you press the ?/1 (B) at the same time,
it will turn off the receiver and other Sony
components (SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically each time
you press the input button (C).
B ?/1 (on/
Press to turn the receiver on or off.
standby) If ZONE 2 or ZONE 3 is selected, only
the main receiver is turned on or off with
this button. To turn off all components
including an amplifier in zone 2 or zone
amplifier in zone 2 or zone 3, press ?/1
and AV ?/1 (A) at the same time
(SYSTEM STANDBY).
C Input
Press one of the buttons to select the
buttons component you want to use. Press a
pink-labeled button after pressing SHIFT
(wj). When you press any of the input
buttons, the receiver turns on. The buttons
are factory assigned to control Sony
components. You can program the remote
to control non-Sony components
following the steps in "Programming the
"Programming the remote".
D RECEIVER
Press to enable the receiver operation.
Name Function
E ZONE 2
Press to enable the zone 2/zone 3
ZONE 3
operation.
F PIP
Press SHIFT (wj), then press PIP to
switchthe image of the PIP (Picture in
Picture) window.
The image will be changed as follows.
EXT VIDEO t ZONE 2 VIDEO t
OFF. You can also change the size of the
PIP window by pressing V/v.
Note
The HDMI video signals are not output
while the PIP window is displayed.
MUSIC
Press to select sound field.
G RESOLUTION
Press SHIFT (wj) then press
RESOLUTION repeatedly to change the
resolution of signals output from the
HDMI OUT or COMPONENT VIDEO
MONITOR OUT jack.
MOVIE Press to select sound field.
H Numeric
Press to
− preset/tune to preset stations.
buttons
− select track numbers of the CD player,
DVD player or MD deck. Press 0/10 to
select track number 10.
− select channel numbers of the VCR or
satellite tuner.
− After pressing TV (wk), press the
numeric buttons to select the TV
channels.
I ENTER
Press to enter the value after selecting a
channel, disc or track using the numeric
buttons.
MEMORY Press to store a station during tuner
operation.
J DISPLAY
Press to select information displayed on
the display window, TV screen of the
VCR, satellite tuner, CD player, DVD
player, or MD deck.
K
After pressing MENU (qd) or TOP
MENU (qk), press V/v, B
or b to select the settings. Then press
V/v/B/b
to enter the selection.
L OPTIONS
Press to display and select items from
option menus for receiver and DVD player.
TOOLS Press to display and select items from the
option menus for DVD player, etc.
M MENU
Press to display the menu of the receiver
of a DVD player, TV, etc.
N ALBUM +/–
Press to replay the previous scene or fast
forward the current scene of the VCR or
DVD player.
a)
O m/M
Press to operate the DVD player, CD
a)
x
player, MD deck or tape deck, etc.
a)
X
b)
H
a)
./>
TUNING +/– Press to selest station.
P PRESET
Press to register FM/AM Radio stations or
b)
+ /– to select preset stations.
TV CH +/– Press TV (wk) and then press TV CH+/−
to operate the TV, satellite tuner, VCR, etc.
Q F1/F2
Press TV (wk) and then press F1 or F2 to
select a component to operate.
• HDD recorder
F1: HDD
F2: DVD
• DVD/VHS combo player
F1: DVD
F2: VHS
TV/VIDEO Press TV/VIDEO and TV (wk) at the same
at the same time to select the input signal
(TV input or video input).
WIDE
Press to select the wide picture mode.
MACRO1,
Press RECEIVER (4) and then press
MACRO2 MACRO 1 or MACRO 2 to set up the
macro function.
STR-DA5200ES
Name Function
R TOP MENU
Press to display the menu or on-screen
guide of the DVD player on the TV screen.
Then use V/v/B/b and
menu operations.
MENU
Press to display the menus of the DVD
player on the TV screen. Then use
V/v/B/b and
to perform a menu
operations.
NIGHT Press RECEIVER (4) and then press
MODE
NIGHT MODE to activate the NIGHT
MODE function.
INPUT Press RECEIVER (4) and then press
MODE INPUT MODE to select the input mode
when the same components are connected
to both digital and analog jacks.
S MUTING
Press to silence the sound.
T MASTER
Press to adjust the volume level of all
b)
VOL + /–
speakers at the same time.
TV VOL +/– Press TV (wk) and then press TV VOL +/−
to adjust the volume level of the TV.
U DISC SKIP
Press to skip a disc when using a
multi-disc changer.
V RETURN/
Press to return to the previous menu or exit
EXIT O
the menu while the menu or on-screen
guide of the VCR, DVD player, or satellite
tuner is displayed on the TV screen.
W ON SCREEN
Press to turn the GUI display mode on or
off. Press MENU (qd) to display the
menu when "GUI ON" appears on the
display.
X CLEAR
Press to
− clear a mistake when you press the
incorrect numeric button.
− return to continuous playback, etc. of
the satellite tuner or DVD player.
>10 Press to select
− track numbers over 10 of the VCR,
satellite tuner, CD player or MD deck.
− channel numbers of the Digital CATV
terminal.
D.TUNING
Press to enter direct tuning mode.
Y A.DIRECT
Press SHIFT (wj) then press A.DIRECT
to switch the audio of the selected input
to analog signal without any adjustment.
2CH Press to select sound filed.
Z SLEEP
Press SHIFT (wj) then press SLEEP to
activate the Sleep Timer function and the
duration which the receiver turns off
automatically.
A.F.D Press to select sound filed.
wj SHIFT
Press to light up the button. It changes the
changes the remote button function to
activate the buttons with pink printing.
wk TV Press to enable the TV operation.
wl RM SET UP Press to set up the remote.
a)
See the table on page111 for information on the buttons that you
can use to control each component.
b)
The tactile dot is attached to these buttons (H, PRESET+).
Use as a mark of operation.
Notes
• Some functions explained in this section may not work
on the model.
• The above explanation is intended to serve as an example only.
Therefore, depending on the component, the above operation
may not be possible or may operate differently than described.
to perform
17