AUVIO 15-305 User Manual

Package contents
TM
Remote Control
„ „
User's Guide
„ „
T H E PE RF O R MA NC E YOU NE ED
Universal Home Theater Features
Remote with DVR Controls
Fully backlit keypad is easily visible
„
in the dark.
Integrated scroll wheel makes it
Please read this user's guide before using „
easy to navegate on-screen menus.
your new remote.
1
Install Batteries
Remove the battery cover and
User's Guide 15-305
insert two AAA batteries
(not included) by matching
the polarity symbols (+
/ –) marked inside, then
replace the battery cover.
b
Battery Notes
Dispose of batteries promptly and properly.
Do not burn or bury them.
Use only fresh batteries of the required size
and type.
Do not mix old and new batteries, different
types of batteries (alkaline, or rechargeable),
2/3
2
2
or rechargeable batteries of different
MUTE -
capacities.
Code List
If you do not plan to use the remote for
Device keys -
more than one week, remove the batteries.
Quick Start
Batteries can leak chemicals that can
EXIT -
damage electronic parts.
2
Set up edf g and OK
In MENU, works as UP, DOWN,
„
You can set up the remote by using the
LEFT, RIGHT and OK.
brand code for your device, performing
In SETUP, works as cursor and
„
an automatic search, or performing a
confirm settings.
manual search. Check the Code List to
locate the 3-digit code for your device.
Scroll Wheel
„
Use the Brand Code
1.
Power on the device.
„
2. Press SET and the device key
SET -
(TV, VCR/DVD, or SAT/CBL)
simultaneously. The red LED lights.
VOL +/–
3. Enter the 3-digit code (for example,
Control your VCR or DVD player.
451 or 489 for an Auvio TV). The
These functions are the same as those
LED blinks after each number and
on the device's original remote.
turns off if successful.
4. Press various keys to make sure
they work. Access sub channels on a TV or receiver.
3
3
G - Turn on or off a selected device.
Turn off the sound.
INPUT - Select the video inputs.
Select a device to control.
CC - Closed caption options.
Change viewing options (4:3
ASPECT -
Exit menu and go back to viewing.
or 16:9)
MENU
Display the menu for the selected device.
LEARN - Copy key functions
SLEEP - Set the sleep timer.
PROG - Operate the program guide
function and secondary device menus.
GUIDE - Display the program guide for the
selected device.
Use to select channels: turn clockwise
CH +/– Select the next or previous channel.
for CH+, and anti-clockwise for CH-.
Navigate menus.
PIP - Switch on/off Picture-In-Picture feature.
Press to return to the last channel.
LAST -
Enter setup for the remote.
Adjust the volume. Directly enter channels.
0-9 -
-
Confirm a setting.
Color Keys
Functions for the four color keys are the same
as those on the device's original remote.
4 5
4 5
n
switches itself off when the code is
Notes:
If the code number is incorrect, the red found.
LED blinks twice. Return to step 3 and try
4. Once the device turns off, press any
another code.
key (except SET) immediately to
If you've entered a code and some keys on
your new remote don't work, try the next confirm the code.
3-digit code listed for your device.
5. If the automatic search does not
If you want to quit during device setup,
press the device key or wait 10 seconds for find the code for your device, try
the remote to exit setup automatically. the steps under "Manual Search, "
which will take longer. Automatic
Auto Search
search stops after one search cycle,
If your device's code isn't listed in the approximately 18 minutes for TV,
Code List, or your remote doesn't
20 minutes for DVD/VCR/DVR, 9
work as instructed in "Use the Brand minutes around for satellite or cable,
Code," follow the steps below to
and 13 minutes other devices.
automatically search for your device. n
Notes:
1. Power on the desired device. If it is
Since action is required during automatic
a VCR, insert a tape. search, you must stay with the device for the
duration of the process or you might miss the
2. Pointing the remote control toward
code and have to repeat the process.
your device, press and hold SET
If you miss the code during the automatic
search, press SET to change search
and the device key simultaneously
direction to get the code quickly.
for at least 3 seconds.
Press G to turn on the device and
6.
The red LED blinks slowly while
3.
check other remote functions.
the remote searches. The device
6 7
6 7
n
Notes:
If some keys still don't work properly, repeat
steps 2-4 to restart the search for a suitable
code.
To stop searching, press any key (except
SET) to quit search. The red LED turns off
and search stops.
During search, you can press SET to change
search direction from forward to backward
or vice versa.
Manual Search
Power on the desired device. If it is
1.
a VCR, insert a tape.
2. Point the remote control toward
your device, then press SET and the
device key simultaneously. The red
LED lights.
Press G until the device turns off,
3.
then press the appropriate device
key quickly to confirm the code.
Press G to turn the device back on.
4.
5. Check the other function keys
(except G). If all the keys work
8
8