Nikon CoolPix S9700 Reference Manual page 220

Display
No access.
Could not connect.
Wi-Fi connection
terminated.
Lens error
Communications
error
System error
E94
Cause/Solution
The camera could not receive the
communication signal from the smart device.
Select Connect to smart device in the Wi-Fi
options menu, and wirelessly connect the
camera and smart device again.
The camera failed to establish the connection
while receiving the communication signals
from the smart device. Select a different
channel in Channel in Options in the Wi-Fi
options menu and establish the wireless
connection again.
A cable was connected to the camera while the
camera and smart device were wirelessly
connected, the battery level became low, or the
connection was aborted due to poor
connectivity. Check the status of the camera
and establish the wireless connection again.
A lens error occurred.
Turn the camera off and then on again. If the
error persists, contact your retailer or Nikon-
authorized service representative.
An error occurred while communicating with
the printer.
Turn the camera off and reconnect the USB
cable.
An error occurred in the camera's internal
circuitry.
Turn the camera off, remove and reinsert the
battery, and turn the camera on. If the error
persists, contact your retailer or Nikon-
authorized service representative.
A
94,
E89
94,
E89
94,
E89
20
E22
10, 20