Adjusting The Valve Clearance; Tires - Yamaha FJR1300R Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR

Adjusting the valve clearance

The valve clearance changes with use,
resulting in improper air-fuel mixture
and/or engine noise. To prevent this
from occurring, the valve clearance
must be adjusted by a Yamaha dealer
at the intervals specified in the periodic
maintenance and lubrication chart.
6
EAU00637

Tires

To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle, note the
regarding the specified tires.
Tire air pressure
The tire air pressure should be
checked and, if necessary, adjusted
before each ride.
WARNING
_
G
The tire air pressure must be
checked and adjusted on cold
tires (i.e., when the temperature
of the tires equals the ambient
temperature).
G The tire air pressure must be
adjusted in accordance with the
riding speed and with the total
weight of rider, passenger, car-
go, and accessories approved
for this model.
_
EAU03581 CE-22E
Load*
following points
Up to 90 kg (198 lb)
90 kg (198 lb)–
maximum
High-speed riding
CE-16E
EW000082
Maximum load*
* Total weight of rider, passenger, cargo and
accessories
6-21
Tire air pressure
(measured on cold tires)
Front Rear
250 kPa 250 kPa
2
(2.50 kgf/cm , (2.50 kgf/cm
36 psi) 36 psi)
250 kPa 290 kPa
2
(2.50 kgf/cm , (2.90 kgf/cm
36 psi) 42 psi)
250 kPa 250 kPa
2
(2.50 kgf/cm , (2.50 kgf/cm
36 psi) 36 psi)
FJR1300: 202 kg (445 lb)
FJR1300C: 201 kg (443 lb)
2
,
2
,
2
,