Installation - Hitachi CP-X955W Operating Manual

Installation

Example of the projector and screen installation
Determine picture size and projection distance as illustrated below.
Screen (inch)
How to use foot adjusters
Adjust the projection position using the foot adjusters at the bottom of the projector.
1. Lift up the projector, unlock the foot adjusters.
2. Adjust a viewing angle, and then lock the foot adjusters complete.
3. To adjust the angle slightly, revolve the foot adjusters.
Downloaded from www.Manualslib.com
View from the top
Screen
a (inch)
b (inch)
Minimum Maximum
40 60 89 3.4
60 89 134 5.1
80 6.9
119 179
100 8.6
149 224
120 269 10.3
179
150 224 336 12.9
200 298 448 17.2
View from the front
unlock ←
Foot adjuster
Do not unlock the foot adjusters while you do not support the projector, to avoid falling of the
Caution
projector and causing an injury.
Do not revolve the foot adjusters by force, the foot adjusters is damaged.
If the foot adjusters do not lock completely, move the foot adjusters a little before locking.
manuals search engine
View from the side
Lens center
b
a
a: Distance from the projector to the screen. (±10%)
b: Length from the center of the lens to the bottom of the
picture. (±10%)
This screen size is full-screen size. (1024 dots × 768 dots)
Installation of liquid crystal projector
Please basically use liquid crystal projector at the horizontal
position.
If you use liquid crystal projector by the lens up position, the
lens down position and the side up position, this may cause the
heat inside to build up and become the cause of damage.
View from the side
→ lock
A viewing angle of 2° ~ 12° can be changed.
11