Specifications - Pioneer DEH-P5450 Operation Manual

Additional Information

Specifications

General
Power source ...................... 14.4 V DC (10.8 – 15.1 V
Grounding system .............. Negative type
Max. current consumption
............................................. 10.0 A
Dimensions (W × H × D):
(DIN)
Chassis ................ 178 × 50 × 157 mm
Nose ..................... 170 × 58 × 19 mm
(D)
Chassis ................ 178 × 50 × 162 mm
Nose ..................... 170 × 46 × 14 mm
Weight ................................. 1.5 kg
Amplifier
Continuous power output is 22 W per channel min. into
4 ohms, both channels driven 50 to 15,000 Hz with no
more than 5% THD.
Maximum power output ..... 50 W × 4, 50 W × 2/4 Ω +
Load impedance ................. 4 Ω (4 – 8 Ω [2 Ω for 1 ch]
Preout max output level/output impedance
............................................. 2.2 V/1 kΩ
Equalizer (3-Band Parametric Equalizer)
(Low) ............................ Frequency:
(Mid) ............................ Frequency:
(High) .......................... Frequency:
Loudness contour
(Low) ............................ +3.5 dB (100 Hz),
(Mid) ............................ +10 dB (100 Hz),
(High) .......................... +11 dB (100 Hz),
allowable)
70 W × 1/2 Ω (for
subwoofer)
allowable)
40/80/100/160 Hz
Q Factor:
0.35/0.59/0.95/1.15
(+6 dB when boosted)
Level: ±12 dB
200/500/1k/2k Hz
Q Factor:
0.35/0.59/0.95/1.15
(+6 dB when boosted)
Level: ±12 dB
3.15k/8k/10k/12.5k Hz
Q Factor:
0.35/0.59/0.95/1.15
(+6 dB when boosted)
Level: ±12 dB
+3 dB (10 kHz)
+6.5 dB (10 kHz)
+11 dB (10 kHz)
(volume : –30 dB)
Tone controls
(Bass) .......................... Frequency:
(Treble) ......................... Frequency:
Subwoofer output
Frequency .................... 50/80/125 Hz
Slope ........................... –12 dB/oct.
Gain ............................. ±12 dB
CD player
System ................................ Compact disc audio
Usable discs ....................... Compact disc
Signal format:
Sampling frequency ... 44.1 kHz
Number of quantization bits
..................................... 16; linear
Frequency characteristics
............................................. 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio ........... 94 dB (1 kHz) (IEC-A
Dynamic range ................... 92 dB (1 kHz)
Number of channels .......... 2 (stereo)
FM tuner
Frequency range ................. 87.9 – 107.9 MHz
Usable sensitivity ............... 9 dBf (0.8 µV/75 Ω, mono,
50 dB quieting sensitivity ... 15 dBf (1.5 µV/75 Ω, mono)
Signal-to-noise ratio ........... 70 dB (IEC-A network)
Distortion ............................ 0.3% (at 65 dBf, 1 kHz,
Frequency response ........... 30 – 15,000 Hz (±3 dB)
Stereo separation ............... 40 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ................. 530 – 1,710 kHz (10 kHz)
Usable sensitivity ............... 18 µV (S/N: 20 dB)
Selectivity ............................ 50 dB (±10 kHz)
Infrared remote control
Wavelength ......................... 940 nm ±50 nm
Output ................................. typ; 12 mw/sr per infrared
Note
• Specifications and the design are subject to
possible modifications without notice due to
improvements.
40/63/100/160 Hz
Level: ±12 dB
2.5k/4k/6.3k/10k Hz
Level: ±12 dB
system
network)
S/N: 30 dB)
stereo)
LED
En
Section
09
37