Dell Latitude? L400 User Manual page 9

1-8 Dell Latitude L400 Advanced Port Replicator User's Guide
Disconnecting the Computer From the APR
Use the following procedure to disconnect the computer from the APR:
1. Save all your work, and exit all application programs.
2. Shut down the computer.
3. At the same time, press down on the left and right release buttons on the top of
the replicator, as shown in Figure 1-3, to undock the computer.
4. Lift the computer up and away from the APR.
Figure 1-3. Disconnecting the Computer From the APR
release buttons