Connecting To A Dvd Player - JVC AV-36260 User Manual

Connections
Connecting to a DVD player
AUDIO OUT
R L
Green
Blue
Red
1) Connect Green cable out from DVD player "Y" Component Output, in to TV "Y" Component Input.
2) Connect Blue cable out from DVD player "PB"Component Output, in to TV "PB" Component Input.
3) Connect Red cable out from DVD Player "PR" Component Output, in to TV "PR" Component Input.
4) Connect White Audio cable out from DVD Left Audio Outp_, in to TV Left Audio Input 2.
5) Connect Red Audio cable out from DVD Right Audio Output, in to TV Right Audio Input 2.
Green, blue and red are the most common colors for DVD cables. Some models may vary colors,
please consult the user's manual for your DVD Player for more information.
Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set
of connections (DVD or Audio Output) before starting the other to avoid accidentally switching the
cables.
See page 20 for instructions on programming your remote control to operate the basic functions of
your DVD player.
NOTE: Progressive DVD Players (players with an output scan of 31.5 KHz) will not work properly
with this television.
14