•
Mount the input connector cover that contains the AC socket (Figure 8-3).
•
Test the TV by plugging in AC and a VHF signal. The TV will operate for at least 30 minutes without the fan
connected. There will be horizontal noise bars of interference from the power supply when the rear shield is
not installed.
•
Install the TV shield and fan. Make sure the shield makes contact to the conductive mesh on all four
sides and the shield is screwed into the center TV board assembly or you will have interference on
the TV stations.
•
Install the rear panel.
8. Plasma Panel Replacement - KZ-32TS1U
Fan & Shield
Figure 8-2
22