Add Mode Position; Specified Decimal Point Position; Rounding Selector - Citizen CT-770II Instruction Manual

A

: Add mode position

The second lowest digit automatically becomes the
decimal point position without depressing decimal
point key.

0,2,3 : Specified decimal point position

A decimal point is always put at a specified
position of result.
F : Floating decimal point position
Floating decimal point mode is used.

Rounding Selector

: Cuts off the decimal to the specified number of
places.
5/4 : Rounding off the decimal to the specified number
of places.
: Rounding up the decimal to the specified number
of places.
The signs of the display mean the following :
GT : Grand Memory Loaded.
REP : Replay mode.
CRT : Correction mode.
MAX : Maximum value display.
MIN : Minimum value display.
: Item counter ( Max : 100 ).
K : Memory constant is loaded.
K= : Memory constant display.
SHIFT : The SHIFT key has been pressed.
MU : Mark-up/down display.
HDBMRP9N-E.doc
M
ER
IN> : Insert mode.
AVG : Averagevaluedisplay.
-E2-
SCALE 1:1 Size: 125x90mm
: Memory Loaded.
: Overflow-error.
2003/11/26