Controlling Devices With Power On And Off; Controlling Combo Devices; Vcr/Dvd/Dvr Punch-Through - GE RM84930 Instruction Manual

Using Your Remote, cont.
Controlling Devices with Separate
Power On and Off Buttons
Some GE, RCA and ProScan models require
you to press the device button for more than one
second to turn the device on and the ON•OFF
button to turn the device off.

Controlling Combo Devices

Some Combo devices (e.g. TV/VCR, TV/DVD,
DVD/VCR, etc.) will require you to set up two
different Mode buttons to control both parts of the
Combo device. For example, if you have a TV/
DVD Combo, you might need to set up one code
under the TV button to control the TV part AND a
separate code (under any other Mode button) to
control the DVD part.
VCR/DVD Punch-Through
This remote allows the 6 VCR transport buttons
(i.e. PLAY, PAUSE, STOP, FF, REWIND, and
REC) to Punch-Through control from any Mode
programmed with TV, SAT or Cable codes to the
last VCR, or DVD programmed Mode you used.
This feature will not operate if the programmed
TV, SAT or Cable code has its own VCR transport
button control e.g. a TV Combo, SAT/PVR, etc.
Backlight Button
Backlighting is activated when you press the
Backlight button. Backlight illumination occurs
for five seconds after the Backlight button has
been pressed. Any further key-presses within five
seconds will continue to reset the five second time-
out period. I.E., illumination always remains on for
five seconds after the last keypress. Once timed
out, the Backlighting will not reactivate until the
Backlight button is pressed again.
10