Button Functions - GE RM24977 Instruction Manual

Button Functions

Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. PREV.CH may be called RECALL, or
ENTER may be called DISPLAY. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have PREV.CH ability
for the PREV.CH button to operate this feature.
TV, VCR, etc. ON-OFF Turns
Selects product product On or Off.
to be operated.
CODE SEARCH
For setup.
MUTE Turns off the
TV sound while the
picture remains.
PREV.CH Returns to
the previously selected
channel, or DVD repeat
toggle. REPEAT performs
DVD players "A-B Repeat"
(or RPT A.B) function for
repeat play of current
Chapter or Track.
CC (SUBTITLE)
TV Closed
Caption (if your
TV has this
feature) or DVD
Subtitle toggle.
GUIDE displays satellite
or cable on-screen
program guide.
ENTER
For some TV models,
used after direct channel
number entry to immedi-
ately change to the
selected channel.
RECORD, PLAY, STOP, REW, FF, PAUSE VCR
control buttons operate your VCR even when the
remote is set to operate the TV. Also operates
DVD Scan -/+. Note the VCR keys also control
DVD when in DVD Mode.
Red Indicator
Lights when any
button is pressed.
4
Button Functions, cont.
CHANNEL Up/Down
Changes the channels.
SKIP +/- controls DVD/CD
track selection i.e. DVD/CD
Track Skip Up/Down (in
DVD and CD modes).
INPUT
For some TVs, press repeatedly to
select from available viewing sources
(antenna, cable box, VCR, etc.).
Note: The REC button must be pressed TWICE to
record from your VCR. For some brands of VCRs, you
might need to press the REC button once, then press it
again for three seconds.
Shift Press and
release to access
buttons labeled in red
(red indicator stays on).
Press again to exit
Shift mode.
VOLUME UP/DOWN
Changes the volume
level of the product,
normally the TV.
OK Selects menu
items for the device
you are controlling.
INFO button brings up DVD
Display or Control Menu for
Chapter/Track/Title number,
Time remaining/elapsed,
system information, etc.
Menu Press and release Shift
then Menu to display the menu
on the TV. The red LED is on
continuously to indicate the
remote is in Menu mode, VOL
UP/DOWN keys operate as
cursor right/left, CH+/- keys
operate as cursor up/down,
and Mute operates as OK.
Press Sleep/Exit key to exit
TITLE Brings up the DVD
Title Menu screen.
NUMBERS
Enter numbers for direct
channel selection. Some
products require ENTER to be
pressed after channel selection.
5
Menu.