Button Functions - GE RM24964 Instruction Manual

Button Functions

Some buttons on the remote might have functions that
are referred to by different names on the device you are
controlling. E.G. LAST may be called RECALL, or
DISPLAY may be called INFO. These differences
depend on the brand and model of your product. Also,
this remote can only operate features that exist on your
product. E.G., your product must have LAST ability for
the LAST button to operate this feature.
Red Indicator
Lights when any
button is pressed.
TV, DVD/VCR,
SAT/CBL. Selects
product to be
operated.
MUTE Turns off the
TV sound while the
picture remains.
OK Selects menu
items for the device
you are controlling.
NUMBERS
Enter numbers for direct
channel selection. Some
products require ENTER to
be pressed after channel
selection.
CC TV Closed
Caption (if your TV
has this feature) or
DVD Subtitle toggle.
SETUP
For setup.
ENTER
For some TV models,
used after direct channel
number entry to immedi-
ately change to the
selected channel.
POWER Turns
product On or Off.
SLEEP enables the
remote to turn off your
TV after a period of 1 to
99 minutes.
4
Button Functions, cont.
The most commonly used buttons are accessible even
with the remote "closed" as shown below. Just flip it
open to gain access to less frequently used buttons.
SHIFT Press and release to
access buttons labeled in
blue (red indicator stays on).
Press again to exit Shift
mode.
RECORD, PLAY, STOP, REW, FF, PAUSE VCR
control buttons operate your VCR even
when the remote is set to operate the TV.
Also operates DVD Scan -/+. Note the VCR
keys also control DVD when in DVD Mode.
Note: The REC button must be pressed
TWICE to record from your VCR. For some
brands of VCRs, you might need to press
the REC button once, then press it again for
MENU Press and release SHIFT then MENU to display
the menu on the TV. The red LED is on continuously to
indicate the remote is in Menu mode, VOL UP/DOWN
buttons operate as cursor right/left, CH+/- buttons
operate as cursor up/down, and Mute operates as OK.
Press LAST/EXIT button to exit Menu.
DISP Display button shows date and time if your TV or
VCR has that feature.
CHANNEL UP/DOWN
Changes the channels.
Also controls MENU
navigation in TV, DVD or
SAT mode for many
brands/models.
INPUT selects the video
input of your TV.
VOLUME UP/DOWN
Changes the volume
level of the product,
normally the TV.
EXIT Exit On-Screen Menus
and/or Return to previous
On-Screen selection.
LAST Returns to the
previously selected channel.
three seconds.
5